REFERENCES. 2. Acherjee B. et al. Application of artificial neural network for predicting weld quality in laser transmission welding of thermoplastics / Acherjee B.

1. Abstracts [Electronic resource] – Режим доступу: http://writingcenter.unc.edu/handouts/abstracts/

2. Acherjee B. et al. Application of artificial neural network for predicting weld quality in laser transmission welding of thermoplastics / Acherjee B., Mondal S., Tudu B., Misra D. // Applied Soft Computing Journal, Vol. 11, No. 2, 2011. - pp. 2548–2555.

3. Chandel R.S., Seow H.P., Cheong F.L. Effect of increasing deposition rate on the bead geometry of submerged arc welds / Chandel R.S., Seow H.P., Cheong F.L. // Journal of Materials Processing Technology, Vol. 72, No. 1, 1997. – pp. 124–128.

4. Cho D.W., Song W.H., Cho M.H., Na S.J. Analysis of submerged arc welding process by three-dimensional computational fluid dynamics simulations / Cho D.W., Song W.H., Cho M.H., Na S.J. // Journal of Materials Processing Technology, Vol. 213, 2013. – pp. 2278–2291.

5. Dhas E.J.R., Kumanan S. Optimization of parameters of submerged arc weld using non conventional techniques / Dhas E.J.R., Kumanan S. // Applied Soft Computing Journal, Vol. 11, No. 8, 2011. – pp. 5198–5204.

6. Electric L. The Procedure Handbook of Arc Welding / Electric L. – Cleveland: Lincoln Electric, 1994.

7. General writing [Electronic resource] – Режим доступу: http://www.monash.edu.au/lls/llonline/writing/engineering/report/index.xml

8. Glendinning E.H., Pohl A. Oxford English for Careers. Technology 2. Student’s Book / Glendinning E.H., Pohl A. – Oxford University Press. – 132 p.

9. Gunaraj V., Murugan N. Application of response surface methodology for predicting weld bead quality in submerged arc welding of pipes / Gunaraj V., Murugan N. // Journal of Materials Processing Technology, Vol. 88, No. 1, 1999. – pp. 266–275.

10. Gunaraj V., Murugan N. Prediction and comparison of the area of the heat-affected zone for the bead-on-plate and bead-on-joint in submerged arc welding of pipes / Gunaraj V., Murugan N. // Journal of Materials Processing Technology, Vol. 95, No. 1–3, 1999. – pp. 246–261.

11. Hicks J. Welded Joint Design / J. Hicks. – New York: Industrial Press, 1999.

12. Howard C.B., Helzer S.C. Modern Welding Technology / Howard C.B., Helzer S.C. – New Jersey: Pearson Education, 2005.

13. Kanjilal P., Pal T.K., Majumdar S.K. Combined effect of flux and welding parameters on chemical composition and mechanical properties of submerged arc weld metal / Kanjilal P., Pal T.K., Majumdar S.K. // Journal of Materials Processing Technology, Vol. 171, No. 2, 2006. – pp. 223–231.

14. Klas W. Welding processes handbook / Klas W. – New York: CRC Press LLC, 2003.

15. Leitner M., Fössl T., Stoschka M., Eichlseder W. Evaluation of fillet weld properties and fatigue behaviour in dependence of welding parameters / Leitner M., Fössl T., Stoschka M., Eichlseder W. // Archives of Civil and Mechanical Engineering, Vol. 11, No. 3, 2011. – pp. 651–660.

16. Li P., Fang M.T.C., Lucas J. Modelling of submerged arc weld beads using self-adaptive offset neutral networks / Li P., Fang M.T.C., Lucas J. // Journal of Materials Processing Technology, Vol. 71, No. 2, 1997. – pp. 288–298.

17. Logic in Argumentative Writing [Electronic resource] – Режим доступу: http://grammar.ccc.commnet.edu/grammar

18. Murugan N., Gunaraj V. Prediction and control of weld bead geometry and shape relationships in submerged arc welding of pipes / Murugan N., Gunaraj V. // Journal of Materials Processing Technology, Vol. 168, No. 3, 2005. – pp. 478–487.

19. Nagesh D.S., Datta G.L. Genetic algorithm for optimization of welding variables for height to width ratio and application of ANN for prediction of bead geometry for TIG welding process / Nagesh D.S., Datta G.L. // Applied Soft Computing Journal, Vol. 10, No. 3, 2010. – pp. 897–907.

20. Serope K., Schmid S.R. Manufacturing Engineering and Technology / Serope K., Schmid S.R.. – Prentice Hall, 2001.

21. Sudhakaran R., VeL Murugan V., Senthil Kumar K.M. Effect of welding process parameters on weld bead geometry and optimization of process parameters to maximize depth to width ratio for stainless steel gas tungsten arc welded plates using genetic algorithm / Sudhakaran R., VeL Murugan V., Senthil Kumar K.M. // European Journal of Scientific Research. Vol. 62, No. 1, 2011. – pp. 76–94.

22. Wikle H.C., Kottilingam S., Zee R.H., Chin B.A. Infrared sensing techniques for penetration depth control of the submerged arc welding process / Wikle H.C., Kottilingam S., Zee R.H., Chin B.A. // Journal of Materials Processing Technology, Vol. 113, No. 1–3, 2001. – pp. 228–233.

23. Zhao D., Wanga Y., Lin Z., Sheng S. An effective quality assessment method for small scale resistance spot welding based on process parameters / Zhao D., Wanga Y., Lin Z., Sheng S. // NDT & E International, Vol. 55, 2013. – pp. 36–41.