Initial Charge

• Place the strip [A] of caps loosely over the filler ports.

• Newly activated sealed batteries require an initial charge.

Standard Charge 1.2 A × 5-10 hours

• If using a recommended battery charger, follow the
charger’s instructions for newly activated sealed battery.

Kawasaki-recommended chargers: Optimate III

Yuasa 1.5 Amp Automatic Charger

Battery Mate 150-9

• If the above chargers are not available, use equivalent
one.

NOTE

OCharging rates will vary depending on how long the battery has been stored, temperature, and the type of charger used. Let battery sit 30 minutes after initial charge, then check voltage using a voltmeter. If it is not at least 12.8 volts, repeat charging cycle.

• After charging is completed, press down firmly with both
hands to seat the strip of caps [A] into the battery (don’t
pound or hammer). When properly installed, the strip of
the caps will be level with the top of the battery.