Clutch Lever and Cable

Clutch Lever Position Adjustment

The adjuster has 5 position so that the clutch lever posi­tion can be adjusted to suit the operator’s hand. • Push the lever forward and turn the adjuster [A] to align

the number with the arrow mark [B] on the lever holder. ○The distance from the grip to the released lever is mini­mum at number 5 and maximum at number 1.

Clutch Cable Inspection

• Refer to the Clutch Cable Inspection in the Periodic Main­
tenance chapter.

Clutch Lever Installation

• Install the clutch lever so that the mating surface [A] of
the lever holder is aligned with the punch mark [B] on the
handlebar.

Cable Lubrication

Whenever the clutch cable is removed, lubricate the clutch cable as follows. • Apply a thin coating of grease to the cable upper and

lower ends.

Lubricate the cable with a penetrating rust inhibitor.