Use for drinking

• Situate the motorcycle so that it is perpendicular to the ground.

• Remove the engine guard (see engine Guard Removal in the Frame chapter).

• Place a container under the water pump [A].

• Remove the drain plug [B], and drain the coolant.

• Remove the left lower fairing (see Lower Fairing Removal in the Frame chapter).

2-42 Периодический ремонт Maintenance Procedure

• Remove the radiator cap [A] in two steps. First turn the cap counterclockwise to the first stop and wait there for a few seconds. Then push down and turn it further in the same direction and remove the cap.

○The coolant will drain from the radiator and engine.

• Remove the left side cover (see Side Covers Removal in the Frame chapter).

• Pull off the air vent hose [A], unscrew the bolts [B] and remove the reserve tank [C] with the lower hose attached.

• Unscrew the cap [D] and pour the coolant into a container.

• Inspect the old coolant for color and smell (mentioned above).