Tie-Rod, Rocker Arm

Tie-Rod Removal

• Squeeze the brake lever slowly and hold it with a band [A].

• Using the jack, raise the rear wheel off the ground.

Special Tool - Jack: 57001-1238

• Remove the upper tie-rod bolt [A] pushing the rocker arm sleeve and swingarm sleeve for upper tie-rod a little in after removing the nut.

• Remove:

Lower Tie-rod Bolt and Nut [B] Tie-Rods [C]

Tie-Rod Installation

• Install the tie-rods so that the chamfered side faces the bolts and nuts.

• Tighten:

Torque -Tie-Rod Nuts: 98 N-m (10 kg-m, 72 ft-lb)

Rocker Arm Removal

• Squeeze the brake lever slowly and hold it with a band [A].

• Using the jack, raise the rear wheel off the ground.

Special Tool - Jack: 57001-1238

• Remove:

Left and Right Front Footpeg

NOTE

○Loosen the swingarm pivot nut when installing the rocker arm bolt.

Lower Tie-Rod Bolt and Nut [A]

Lower Rear Shock Absorber Bolt and Nut [B]

Rocker Arm Bolt and Nut [C]

Rocker Arm [D]