The fan switch or the water temperature switch should never be allowed to fall on a hard surface. Such a shock to these parts can damage them

Radiator Fan Switch Removal

• Remove the Left Lower Fairing (see Lower Fairing Re­moval in the Frame chapter).

• Disconnect the fan switch connector [A] and remove the radiator fan switch [B].

Water Temperature Switch Removal

• Drain the coolant.

• Remove the left lower fairing (see Lower Fairing Removal in the Frame chapter).

• Disconnect the lead [A] and remove the water tempera­ture switch [B].

Radiator Fan Switch, Water Temperature Switch Installation

• Apply silicone sealant to the threads before mounting the
water temperature switch.

Sealant - Kawasaki Bond (Silicone Sealant): 56019-120

ODo not apply silicone sealant to the radiator fan switch on the radiator.

• Tighten the water temperature switch and the fan switch.

Torque -Water Temperature Switch: 7.8 N·m (0.80 kgf·m, 69 in·lb) Radiator Fan Switch: 18 N·m (1.8 kgf·m, 13.0 ft·lb)

Radiator Fan Switch, Water Temperature Switch Inspection

• Refer to the Switch and Sensor in the Electrical System
chapter for these inspections.