Carburetors. • Remove the upper carburetor mounting screws [A] and stay [B]

• Remove the upper carburetor mounting screws [A] and
stay [B].

○Remove the fuel supply pipe connected both carburetors.

• Remove the vacuum hose [C] connected both carbure­
tors.

• Remove the lower carburetor mounting screws [A] and stay [B].

• Inspect the O-rings [A] of fuel supply pipe.

• If they are damaged, replace the O-rings.

• The center lines of the carburetor bores must be parallel both horizontally and vertically. If they are not, loosen the mounting screws and align the carburetors on a flat surface. Retighten the mounting screws.

• After assembling the choke mechanism, check to see that the starter plunger lever slides from side to side smoothly without abnormal friction.