Coolant Filling

• Install the drain plug [A]. Always replace the gasket with a new one.

• Tighten the drain plug.

Torque -Coolant Drain Plug: 11 N·m (1.1 kgf·m, 95 in·lb)

• Fill [A] the radiator up to the bottom of the radiator filler neck [B] with coolant [C], and install the cap turning it clockwise about 1/4 turn.

NOTE

○Pour in the coolant slowly so that it can expel the air

from the engine and radiator. ○The radiator cap must be installed in two steps. First

turn the cap clockwise to the first stop. Then push down

on it and turn it the rest of the way.