Библиографический список. 2. Поконова, Ю. В. Нефтяные битумы / Ю. В

1. Гунн, Р.Б. Нефтяные битумы / Р.Б. Гунн - М.: Химия, 1973.-

432с.;

2. Поконова, Ю.В. Нефтяные битумы / Ю.В. Поконова. - СПб.: Санкт- Петербургская издательская компания «Синтез», 2005,- 154с.

3. Губницкий, В.М Природные битумы: состояние ресурсов,

особенности освоения и возможности использования / В.М. Губницкий //Геология нефти и газа. - 1997. -.4» 2. - С 16-19.

4. Белонин, М.Д. Повышение эффективности комплексного освоения месторождений тяжелых металлоносных нефтей и битумов / М.Д.Белонин, И.С.Гольдберг, В.В.Грибков, Н.И. Искрицкая // Геология

нефти и газа. - 1990. - 9. - С.2.-4.

5. Колбановская. А.С. Дорожные битумы / А.С. Колбановская, В.В Михайлов,-М.: Транспорт, 1973.-255с.

6. Никишина. М.Ф Производство битумов / М.Ф. Никишина,

В.А. Захаров // Труды СоюздорНИИ. - 1980. - Вып. 46,- С.187-194.

7. Розенталь, Д.А. Получение битумов различных марок компаундированием гудрона с природным асфальтитом / Д.А. Розенталь //Нефтехимия. - 2007.-№ 4. - С.6-7.

8. Сюняев, З.И Нефтяные дисперсные системы / З.И. Сюняев, Р.З. Сюняев, Р.З. Сафиева. - М.: Химия, 1990. - 226 с.

9. Opганические вяжущие и материалы на их основе: метод, указ. к практическим занятиям и лабораторным работам / сост.: О.А. Корчагина, О А. Киселева, Тамб. гос. техн. ун-т. - Тамбов, 2004 - 36 с.

10. Розентать, Д.А. Битумы. Получение и способы модификации /Д.А. Розенталь, А.В. Березников, И.Н. Кудрявцева. - Л.: ЛТИ,1979. -80с.

11. Состав, структура и свойства битумов [Электронный ресурс]. Режим доступа: http:// www.vost.ru / docs / article / sostavstruktura-i-svojstva-bitumov, свободный.

12. Сюняев, P 3. Интенсификация некоторых процессов переработкинефтяного сырья на базе принципов физико-химической механики / Р.З. Сюняев, А.А. Гуреев. - М.: ЦНИИТЭННефтехим, - 1989,- 66 с.

13. Битумы, полимерно-битумные вяжущие, асфальтобетон, полимерасфальтобетон: метод, пособие для слушателей ГОУ ДПО ГАСИС / сост.: Л.М. Гохман. - Москва: Изд-во ГОУ ДПО ГАСИС, 2008,-94 с.

14. Унгер, Ф.Г Фундаментальные аспекты химии нефти. Природа смол и асфальтенов / Ф.Г. Унгер. Л.Н Андреева - Новосибирск: Наука, 1995. - 192 с.

15. Хойдберг, А.Д. Битумные материалы. Асфальтены, смолы, пеки / А.Д. Хойдберг. - М.: Химия, 1974. - 247с.

16. Посадков, И.А. Коллоидная структура битумов / И А. Посадков // Нефтехимия.-1985.-№ 3.-С.41-46.

17. Камьянов, В.Ф. Исследования в области химии высокомолекулярных соединений нефти / Б.Ф. Камьянов // Проблемы и достижения в исследовании нефти. - Томск. - 1990. - С. 65-99

18. Сафиева, Р.З. Физикохимия нефти / Р.З. Сафиева. - М.: Химия, 1998. - 448с.

19. Битумы нефтяные, состав, структура и свойства [Электронный ресурс]. - Режим доступа: httр: / /www.materialsworld.ru/ 8 /bitum.php, свободный.

20. Химический состав нефтей и нефтепродуктов: тез. докл. всес. конф. Тбилиси, октябрь 1984 г,-М.: Наука, 1984.-47 с

21. Батуева, И.Ю. Химия нефти / И.Ю Батуева, А.А Гайле, Ю.В. Поконова. - Л.: Химия, 1984. - 360 с.

22. Абдуллин, И.А., Композиционные материалы с полимерной матрицей Учебное пособие / И.А. Абдуллин и др - Казань: Изд-во КГТУ. - 2006. - 144 с.

23. Богомолов, А И. Химия нефти и газа / А.И Богомолов, А.А. Гайле, В.В. Громова - СПб: Химия, 1995. - 445с.

24. Богомолов, А.И. Современные методы исследования нефтей А.И. Богомолов, М.Б. Темянко, Л.И. Хотынцевой. - Л.: Недра, 1984,-431с.

25. Большаков, Г.Ф. Разделение и анализ нефтяных систем / Г.Ф. Большаков,- Новосибирск: Наука, 1989. - 175 с.

26. Фукс, Г.И. Коллоидная химия нефти и нефтепродуктов / Г.И. Фукс. - М.: Знание, 1984. - 61 с.

27. Камьянов. В.Ф Гетероатомные компоненты нефтей / В.Ф. Камьянов, B.C. Аксенов, В.И. Титов.-Новосибирск:Наука, 1983.-237 с.

28. Поконова Ю.В. Химия высокомолекулярных соединений нефти / Ю.В. Поконова. - Л.: Изд-во ЛГУ, 1980. - 179 с.

29. Петров, А.А. Углеводороды нефти / А.А. Петров. - М.:Наука, 1984,- 264 с.

30. Сюняев, З.И. Прикладная физико-химическая механика нефтяных дисперсных систем / 3 И. Сюняев. М: МИНХ и ГП им. И.М. Губкина, 1982. - 99 с.

31. Сюняев, Р.З Коллоидные структуры асфальтенов / Р.З. Сюняев, Р.З Сюняева - М.: Нефть и газ, 1994. - 49 с.

32. Гуреев, А, А. Технология органических вяжущих материалов/ А.А. Гуреев, Л.М. Гохман, Л.П. Гилязетдинов.-М.: МИНХ и ГП, 1986.-112 с.

33. Сюняев, З.И. Физико-химическая механика нефтяных дисперсных систем / З.И. Сюняев.-М.. Химия, 1981.-89 с.

34. Бибик, Е.Е Реология дисперсных систем / Е.Е. Бибик – Л: Изд-во ЛГУ, 1981,- 170 с.

35. Руденская, И.М. Реологические свойства бигумов / И.М Руденская, А.В Руденский.-М.: Высшая школа, 1967 - 188 с.

36. Печеный, Б Г. Физико-химические основы регулирована структурных и фазовых превращений в процессах производства применения битумов. Автореф. дис. д-ра техн. наук. М., МИНХ и ГП им. И.М. Губкина, 1985. - 48 с.

37. Ребиндер, П.А Высокомолекулярные дисперсные системы / П. А. Ребиндер, И.Н. Влодавец // Поверхностные явления в дисперсных системах Коллоидная химия. - М.: Наука, 1978. - С. 61-73.

38. Ребиндер, П.А Поверхностные явления в дисперсных системах/ П.А. Ребиндер. - М.: Наука, 1978.-С. 294-298.

39. Morgan P, Mulder A. The Shell bitumen industrial handbook. Surrey: Shell Bitumen; 1995.

40. Polacco G, Stastna J, Biondi D, Zanzotto L. Relation between polymer architecture and nonlinear viscoelastic behavior of modified asphalts. Curr Opin Colloid Interface Sci 2006;11(4):230–45.

41. Asphalt Institute; Eurobitume. The bitumen industry – a global perspective, 2nd ed. Lexington, Kentucky: Asphalt Institute; Brussels, Belgium: Eurobitume; 2011.

42. Becker Y, Mendez MP, Rodriguez Y. Polymer modified asphalt. Vision Technol 2001;9(1):39–50.

43. Lu X. On polymer modified road bitumens [doctoral dissertation]. Stockholm: KTH Royal Institute of Technology; 1997.

44. Polacco G, Berlincioni S, Biondi D, Stastna J, Zanzotto L. Asphalt modification with different polyethylene-based polymers. EurPolym J 2005;41(12):2831–44.

45. Giavarini C, De Filippis P, Santarelli ML, Scarsella M. Production of stable polypropylene-modified bitumens. Fuel 1996;75(6):681–6.

46. Panda M, Mazumdar M. Engineering properties of EVA-modified bitumen binder for paving mixes. J Mater Civ Eng 1999;11(2):131–7.

47. Sengoz B, Topal A, Isikyakar G. Morphology and image analysis of polymer modified bitumens. Constr Build Mater 2009;23(5):1986–92.

48. Becker Y, Muller AJ, Rodriguez Y. Use of rheological compatibility criteria to study SBS modified asphalts. J Appl Polym Sci 2003;90(7):1772–82.

49. Chen JS, Liao MC, Tsai HH. Evaluation and optimization of the engineering properties of polymer-modified asphalt. Pract Fail Anal 2002;2(3):75–83.

50. Polacco G, Muscente A, Biondi D, Santini S. Effect of composition on the properties of SEBS modified asphalts. Eur Polym J 2006;42(5):1113–21.

51. Tayfur S, Ozen H, Aksoy A. Investigation of rutting performance of asphalt mixtures containing polymer modifiers. Constr Build Mater 2007;21(2):328–37.

52. Isacsson U, Zeng H. Low-temperature cracking of polymer-modified asphalt. Mater Struct 1998;31(1):58–63.

53. Gorkem C, Sengoz B. Predicting stripping and moisture induced damage of asphalt concrete prepared with polymer modified bitumen and hydrated lime. Constr Build Mater 2009;23(6):2227–36.

54. Alatas_ T, Yilmaz M. Effects of different polymers on mechanical properties of bituminous binders and hot mixtures. Constr Build Mater 2013;42:161–7.

55. Ponniah J, Kennepohl G. Polymer-modified asphalt pavements in Ontario: performance and cost-effectiveness. Trans Res Rec: J Trans Res Board 1996;1545:151–60.

56. von Quintus HL, Mallela J, Buncher M. Quantification of effect of polymer-modified asphalt on flexible pavement performance. Trans Res Rec: J Trans Res Board 2007;2001:141–54.

57. Larsen DO, Alessandrini JL, Bosch A, Cortizo MS. Micro-structural and rheological characteristics of SBS–asphalt blends during their manufacturing. Constr Build Mater 2009;23(8):2769–74.

58. Sengoz B, Isikyakar G. Analysis of styrene–butadiene–styrene polymer modified bitumen using fluorescent microscopy and conventional test methods. J Hazard Mater 2008;150(2):424–32.

59. Brule B, Brion Y, Tanguy A. Paving asphalt polymer blends: relationship between composition, structure and properties. In: Asphalt paving technology 1988: Journal of the Association of Asphalt Paving Technologists; 1988 February 29–March 2; Williamsburg, Virginia. St. Paul, Minnesota: Association of Asphalt Paving Technologists; 1988. p. 41–64.

60. Ouyang C, Wang S, Zhang Y, Zhang Y. Improving the aging resistance of styrene–butadiene–styrene tri-block copolymer modified asphalt by addition of antioxidants. Polym Degrad Stab 2006;91(4):795–804.

61. Wang T, Yi T, Yuzhen Z. The compatibility of SBS-modified asphalt. Pet Sci Technol 2010;28(7):764–72.

62. Chang HL, Wong GK, Lin JR, Yen TF. Electron spin resonance study of bituminous substances and asphaltenes. In: Yen TF, ChilingarianGV, editors. Asphaltenes and asphalts, 2. Developments in petroleum science 40B. Amsterdam: Elsevier; 2000. p. 229–80.

63. European Asphalt Pavement Association. Asphalt in figures 2012 [Internet]. Brussels, Belgium: European Asphalt Pavement Association; 2013 Eurobitume. Life cycle inventory: bitumen, 2nd ed. Brussels, Belgium: Eurobitume; 2012.

64. Isacsson U, Lu X. Testing and appraisal of polymer modified road bitumens – state of the art. Mater Struct 1995;28(3):139–59.

65. Lewandowski LH. Polymer modification of paving asphalt binders. Rubber Chem Technol 1994;67(3):447–80.

66. Yildirim Y. Polymer modified asphalt binders. Constr Build Mater 2007;21(1):66–72.

67. Utracki LA. History of commercial polymer alloys and blends (from a perspective of the patent literature). Polym Eng Sci 1995;35(1):2–17.

68. Legge NR. Thermoplastic elastomers. Rubber Chem Technol 1987;60(3):83–117.

69. Johnson R. History and development of modified bitumen. In: Proceedings of the 8th conference on roofing technology; 1987 April 16–17; Gaithersburg, Maryland. Rosemont, Illinois: National Roofing Contractors Association; 1987. p. 81–4.

70. Anderson AP, Nelson WK, inventor. Shell Development Company, assignee. Bituminous composition. United States patent US 2197461. 1940 April 16.

71. World Road Association (PIARC), Technical Committee Flexible Roads (C8). Use of Modified Bituminous Binders, Special Bitumens and Binders with Additives in Road Pavements. Paris, France: World Road Association (PIARC); 1999.

72. Rostler FS, White RM, Cass PJ. Modification of asphalt cements for improvement of wear resistance of pavement surfaces. Report No.: FHWA-RD-72-24 Final Rpt. Washington, D.C.: Federal Highway Administration; 1972 March.

73. Zenke G. On the use of polymer-modified bitumen in asphalt mixes. Stationaere Mischwerk 1976;10(6):255–64 [In German].

74. Kameau G, Duron M. Influence of static and sequenced elastothermoplastic copolymers on the mechanical properties of bituminous mixtures. Bulletin de Liaison des Laboratoires des Ponts et Chaussees 1976;18:135–9 [In French].

75. Lucas AG. Modified bitumens for rolled asphalt. Highways Road Constr Int 1800;1976(44):4–5.

76. Chaffin CW, O’Connor DL, Hughes CH. Evaluation of the use of certain elastomers in asphalt. Report No.: FHWA-TX-78180-1F Final Rpt. Washington, D.C.: Federal Highway Administration, July 1978.

77. Piazza S, Arcozzi A, Verga C. Modified bitumens containing thermoplastic polymers. Rubber Chem Technol 1980;53(4):994–1005.

78. Kraus G. Modification of asphalt by block polymers of butadiene and styrene. Rubber Chem Technol 1982;55(5):1389–402.

79. Denning JH, Carswell J. Assessment of ‘Novophalt’ as a binder for rolled asphalt wearing course. Report No.: TRRL Laboratory, Report 1101. Crowthorne, England: Transport and Road Research Laboratory; 1983.

80. Miłkowski W. Catalytic modification of road asphalt by polyethylene. J Trans Eng 1985;111(1):54–72.

81. Jew P, Shimizu JA, Svazic M, Woodhams RT. Polyethylene-modified bitumen for paving applications. J Appl Polym Sci 1986;31(8):2685–704.

82. Bowering RH. Modified bitumens. In: Proceedings of the Australian asphalt pavement association conference 84, 1984 Members Conference; 1984 August 27–28, Hobart, Tasmania. Kew, Victoria: Australian Asphalt Pavement Association; 1984.

83. Reese R, Predoehl NH. Evaluation of modified asphalt binders – Interim report. Report No.: FHWA/CA/TL-89/15. Washington, D.C.: Federal Highway Administration; 1989 September.

84. King GN, Muncy HW, Prudhomme JB. Polymer modification: Binders effect on mix properties (with discussion). In: Asphalt paving technology 1986: Journal of the Association of Asphalt Paving Technologists; 1986 February 17–18; Clearwater Beach, Florida. St. Paul, Minnesota: Association of Asphalt Paving Technologists; 1986. p. 519–540.

85. Wardlaw KR, Shuler S, editors. Polymer modified asphalt binders. Philadelphia, Pennsylvania: American Society for Testing and Materials; 1992.

86. Aglan H. Polymeric additives and their role in asphaltic pavements. Part I: Effect of additive type on the fracture and fatigue behavior. J Elastomers Plast 1993;25(4):307–21.

87. Bahia HU, Anderson DA. Glass transition behavior and physical hardening of asphalt binders (with discussion). In: Asphalt Paving Technology 1993. Journal of the Association of Asphalt Paving Technologists. 1993 March 22–24; Austin, Texas. St. Paul, Minnesota: Association of Asphalt Paving Technologists; 1993. p.93–129.

88. Elmore WE, Kennedy TW, Solaimanian M, Bolzan P. Long-term performance evaluation of polymer-modified asphalt concrete pavements. Report No.: FHWA-TX-94+1306-1F. Washington, D.C.: Federal Highway Administration; 1993 November.

89. Bonemazzi F, Braga V, Corrieri R, Giavarini C, Sartori F. Characteristics of polymers and polymer-modified binders. Trans Res Rec: J Trans Res Board 1996;1535:36–47.

90. Brûlé B. Polymer-modified asphalt cements used in the road construction industry: basic principles. Trans Res Rec: J Trans Res Board 1996;1535:48–53.

91. Adedeji A, Grünfelder T, Bates FS, Macosko CW, Stroup-Gardiner M, Newcomb DE. Asphalt modified by SBS triblock copolymer: structures and properties. Polym Eng Sci 1996;36(12):1707–23.

92. Shin EE, Bhurke A, Scott E, Rozeveld S, Drzal LT. Microstructure, morphology, and failure modes of polymer-modified asphalts. Trans Res Rec: J Trans Res Board 1996;1535:61–73.

93. Loeber L, Durand A, Muller G, Morel J, Sutton O, Bargiacchi M. New investigations on the mechanism of polymer–bitumen interaction and their practical application for binder formulation. In: Proceedings of the 1st Eurasphalt & Eurobitume Congress; 1996 May 7–10; Strasbourg, France. Brussels: Eurasphalt & Eurobitume Congress; 1996: Paper No. 5115.

94. Gahvari F. Effects of thermoplastic block copolymers on rheology of asphalt. J Mater Civ Eng 1997;9(3):111–6.

95. Valkering CP, Vonk W. Thermoplastic rubbers for the modification of bitumens: Improved elastic recovery for high deformation resistance of asphalt mixes. In: Proceedings of the 15th Australian Road Research Board (ARRB) Conference; 1990 August 26–31; Darwin, Northern Territory. Vermont South, Victoria: Australian Road Research Board; 1990. p. 1–19.

96. Krutz NC, Siddharthan R, Stroup-Gardiner M. Investigation of rutting potential using static creep testing on polymer-modified asphalt concrete mixtures. Trans Res Rec: J Trans Res Board 1991;1317:100–8.

97. Stock AF, Arand W. Low temperature cracking in polymer modified binders. In: Asphalt paving technology 1993: Journal of the Association of Asphalt Paving Technologists; 1993 March 22–24; Austin, Texas. St. Paul, Minnesota: Association of Asphalt Paving Technologists; 1993. p. 23–53.

98. Lu X, Isacsson U, Ekblad J. Phase separation of SBS polymer modified bitumens. J Mater Civ Eng 1999;11(1):51–7.

99. Collins JH, Bouldin MG, Gelles R, Berker A. Improved performance of paving asphalts by polymer modification (with discussion). In: Asphalt paving technology 1991: Journal of the Association of Asphalt Paving Technologists; 1991 March 4–6; Seattle, Washington. St. Paul, Minnesota: Association of Asphalt Paving Technologists; 1991. p. 43–79.

100. Bouldin MG, Collins JH, Berker A. Rheology and microstructure of

polymer/asphalt blends. Rubber Chem Technol 1991;64(4):577–600.

101. Sengoz B, Isikyakar G. Evaluation of the properties andmicrostructure of SBS and EVA polymer modified bitumen. Constr Build Mater 2008;22(9):1897–905.

102. Topal A. Evaluation of the properties and microstructure of plastomeric polymer modified bitumens. Fuel Process Technol 2010;91(1):45–51.

103. Lu X, Isacsson U. Artificial aging of polymer modified bitumens. J Appl Polym Sci 2000;76(12):1811–24.

104. Hoare TR, Hesp SAM. Low-temperature fracture testing of asphalt binders: regular and modified systems. Trans Res Rec: J Trans Res Board 2000;1728:36–42.

105. Khattak MJ, Baladi GY. Fatigue and permanent deformation models for polymer-modified asphalt mixtures. Trans Res Rec: J Trans Res Board 2001;1767:135–45.

106. Ruan Y, Davison RR, Glover CJ. Oxidation and viscosity hardening of polymer-modified asphalts. Energy Fuels 2003;17(4):991–8.

107. Durrieu F, Farcas F, Mouillet V. The influence of UV aging of a styrene/butadiene/styrene modified bitumen: comparison between laboratory and on site aging. Fuel 2007;86(10–11):1446–51.

108. Mouillet V, Farcas F, Besson S. Ageing by UV radiation of an elastomer modified bitumen. Fuel 2008;87(12):2408–19.

109. Khodaii A, Mehrara A. Evaluation of permanent deformation of unmodified and SBS modified asphalt mixtures using dynamic creep test. Constr Build Mater 2009;23(7):2586–92.

110. Cortizo MS, Larsen DO, Bianchetto H, Alessandrini JL. Effect of the thermal degradation of SBS copolymers during the ageing of modified asphalts. Polym Degrad Stab 2004;86(2):275–82.

111. Sugano M, Iwabuchi Y, Watanabe T, Kajita J, Iwata K, Hirano K. Relations between thermal degradations of SBS copolymer and asphalt substrate in polymer modified asphalt. Clean Technol Environ Policy 2010; 12(6):653–9.

112. Kutay ME, Gibson N, Youtcheff J. Conventional and viscoelastic continuum damage (VECD)-based fatigue analysis of polymer modified asphalt pavements (with discussion). In: Asphalt paving technology 2008: Journal of the Association of Asphalt Paving Technologists; 2008 April 27–30; Philadelphia, Pennsylvania. St. Paul, Minnesota: Association of Asphalt Paving Technologists; 2008. p. 395–434.

113. Hernández G, Medina EM, Sánchez R, Mendoza AM. Thermomechanical and rheological asphalt modification using styrene–butadiene triblock copolymers with different microstructure. Energy Fuels 2006;20(6):2623–6.

114. Mouillet V, Lamontagne J, Durrieu F, Planche JP, Lapalu L. Infrared microscopy investigation of oxidation and phase evolution in bitumen modified with polymers. Fuel 2008;87(7):1270–80.

115. Lesueur D. The colloidal structure of bitumen: consequences on the rheology and on the mechanisms of bitumen modification. Adv Colloid Interface Sci 2009;145(1–2):42–82.

116. Lesueur D, Gérard JF, Claudy P, Létoffé JM, Martin D, Planche JP. Polymer modified asphalts as viscoelastic emulsions. J Rheol 1998;42(5):1059–74.

117. Redelius P. Bitumen solubility model using Hansen solubility parameter. Energy Fuels 2004;18(4):1087–92.

118. Redelius P. Asphaltenes in bitumen, what they are and what they are not. Road Mater Pavement Des 2009;10(sup1):25–43.

119. Wen G, Zhang Y, Zhang Y, Sun K, Chen Z. Vulcanization characteristics of asphalt/SBS blends in the presence of sulfur. J Appl Polym Sci 2001;82(4):989–96.

120. Wen G, Zhang Y, Zhang Y, Sun K, Fan Y. Rheological characterization of storage-stable SBS-modified asphalts. Polym Test 2002;21(3):295–302.

121. Wen G, Zhang Y, Zhang Y, Sun K, Fan Y. Improved properties of SBS modified asphalt with dynamic vulcanization. Polym Eng Sci 2002;42(5):1070–81.

122. Chen JS, Huang CC. Fundamental characterization of SBS-modified asphalt mixed with sulfur. J Appl Polym Sci 2006;103(5):2817–25.

123. Zhang F, Yu J, Wu S. Effect of ageing on rheological properties of storage-stable SBS/sulfur-modified asphalts. J Hazard Mater 2010;182(1–3):507–17.

124. Zhang F, Yu J, Han J. Effects of thermal oxidative ageing on dynamic viscosity, TG/DTG, DTA and FTIR of SBS-and SBS/sulfur-modified asphalts. Constr Build Mater 2011;25(1):129–37.

125. Li Y, Li L, Zhang Y, Zhao S, Xie L, Yao S. Improving the aging resistance of styrene–butadiene–styrene tri-block copolymer and application in polymer modified asphalt. J Appl Polym Sci 2010;116(2):754–61.

126. Dessouky S, Contreras D, Sanchez J, Papagiannakis AT, Abbas A. Influence of hindered phenol additives on the rheology of aged polymer-modified bitumen. Constr Build Mater 2013;38:214–23.

127. Ouyang C, Wang S, Zhang Y, Zhang Y. Preparation and properties of styrene–butadiene–styrene copolymer/kaolinite clay compound and asphalt modified with the compound. Polym Degrad Stab 2005;87(2):309–17.

128. Ouyang C, Wang S, Zhang Y, Zhang Y. Thermo-rheological properties and storage stability of SEBS/kaolinite clay compound modified asphalts. Eur Polym J 2006;42(2):446–57.

129. Yu J, Wang L, Zeng X, Wu S, Li B. Effect of montmorillonite on properties of styrene–butadiene–styrene copolymer modified bitumen. Polym Eng Sci 2007;47(9):1289–95.

130. Golestani B, Nejad FM, Galooyak SS. Performance evaluation of linear and nonlinear nanocomposite modified asphalts. Constr Build Mater 2012;35:197–203.

131. Jasso M, Bakos D, MacLeod D, Zanzotto L. Preparation and properties of conventional asphalt modified by physical mixtures of linear SBS and montmorillonite clay. Constr Build Mater 2013;38:759–65.

132. Zhang B, Xi M, Zhang D, Zhang H, Zhang B. The effect of styrenebutadiene-rubber/montmorillonite Zhang B, Xi M, Zhang D, Zhang H, Zhang B. The effect of styrenebutadiene-modification on the characteristics and properties of asphalt. Constr Build Mater 2009;23(10):3112–7.

133. Zhang H, Yu J, Wang H, Xue L. Investigation of microstructures and ultraviolet aging properties of organo-montmorillonite/SBS modified bitumen. Mater Chem Phys 2011;129(3):769–76.

134. Polacco G, Krˇízˇ P, Filippi S, Stastna J, Biondi D, Zanzotto L. Rheological properties of asphalt/SBS/clay blends. Eur Polym J 2008;44(11):3512–21.

135. Zhang H, Yu J, Wu S. Effect of montmorillonite organic modification on ultraviolet aging properties of SBS modified bitumen. Constr Build Mater 2012;27(1):553–9.

136. Yeh PH, Nien YH, Chen JH, Chen WC, Chen JS. Thermal and rheological properties of maleated polypropylene modified asphalt. Polym Eng Sci 2005;45(8):1152–8.

137. Fu H, Xie L, Dou D, Li L, Yu M, Yao S. Storage stability and compatibility of asphalt binder modified by SBS graft copolymer. Constr Build Mater 2007;21(7):1528–33.

138. Wang Q, Liao M, Wang Y, Ren Y. Characterization of endfunctionalized styrene–butadiene–styrene copolymers and their application in modified asphalt. J Appl Polym Sci 2007;103(1):8–16.

139. Li J, Zhang Y, Zhang Y. The research of GMA-g-LDPE modified Qinhuangdao bitumen. Constr Build Mater 2008;22(6):1067–73.

140. Zanzotto L, Stastna J, Vacin O. Thermomechanical properties of several polymer modified asphalts. Appl Rheol 2000;10(3):134–44.

141. Hesp SAM, Hoare TR, Roy SD. Low-temperature fracture in reactiveethylene-terpolymer-modified asphalt binders. Int J Pavement Eng 2002;3(3):153–9.

142. Polacco G, Stastna J, Biondi D, Antonelli F, Vlachovicova Z, Zanzotto L. Rheology of asphalts modified with glycidylmethacrylate functionalized polymers. J Colloid Interface Sci 2004;280(2):366–73.

143. Navarro FJ, Partal P, García-Morales M, Martinez-Boza FJ, Gallegos C. Bitumen modification with a low-molecular-weight reactive isocyanate-terminated polymer. Fuel 2007;86(15):2291–9.

144. Martín-Alfonso MJ, Partal P, Navarro FJ, García-Morales M, Gallegos C. Use of a MDI-functionalized reactive polymer for the manufacture of modified bitumen with enhanced properties for roofing applications. Eur Polym J 2008;44(5):1451–61.

145. Martín-Alfonso MJ, Partal P, Navarro FJ, García-Morales M, Gallegos C. Role of water in the development of new isocyanate-based bituminous products. Ind Eng Chem Res 2008;47(18):6933–40.

146. Navarro FJ, Partal P, García-Morales M, Martín-Alfonso MJ, Martínez-Boza F, Gallegos C, et al. Bitumen modification with reactive and non-reactive (virgin and recycled) polymers: a comparative analysis. J Ind Eng Chem 2009;15(4):458–64.

147. Martín-Alfonso MJ, Partal P, Navarro FJ, García-Morales M, Bordado JCM, Diogo AC. Effect of processing temperature on the bitumen/ MDI–PEG reactivity. Fuel Process Technol 2009;90(4):525–30.

148. Carrera V, Partal P, García-Morales M, Gallegos C, Páez A. Influence of bitumen colloidal nature on the design of isocyanate-based bituminous products with enhanced rheological properties. Ind Eng Chem Res 2009;48(18):8464–70.

149. Carrera V, Garcia-Morales M, Partal P, Gallegos C. Novel bitumen/ isocyanate-based reactive polymer formulations for the pavingindustry. Rheol Acta 2010;49(6):563–72.

150. Shivokhin M, García-Morales M, Partal P, Cuadri AA, Gallegos C. Rheological behaviour of polymer-modified bituminous mastics: a comparative analysis between physical and chemical modification. Constr Build Mater 2012;27(1):234–40.

151. Stroup-Gardiner M, Newcomb DE. Polymer literature review. St. Paul, Minnesota: Minnesota Department of Transportation; 1995 September. Report No.: MN/RC-95/27.

152. Chen JS, Liao MC, Shiah MS. Asphalt modified by styrene– butadiene–styrene triblock copolymer: morphology and model. J Mater Civ Eng 2002;14(3):224–9.

153. Zhang F, Yu J. The research for high-performance SBR compound modified asphalt. Constr Build Mater 2010;24(3):410–8.

154. Blanco R, Rodríguez R, García-Garduño M, Castaño VM. Rheological properties of styrene–butadiene copolymer–reinforced asphalt. J Appl Polym Sci 1996;61(9):1493–501.

155. Pérez-Lepe A, Martínez-Boza FJ, Gallegosa C, Gonzálezb O, Muñoz ME, Santamaría A. Influence of the processing conditions on the rheological behavior of polymer-modified bitumen. Fuel 2003;82(11):1339–48.

156. Pérez-Lepe A, Martínez-Boza FJ, Attané P, Gallegos C. Destabilization mechanism of polyethylene-modified bitumen. J Appl Polym Sci 2006;100(1):260–7.

157. González O, Muñoz ME, Santamaría A, García-Morales M, Navarro FJ, Partal P. Rheology and stability of bitumen/EVA blends. Eur Polym J 2004;40(10):2365–72.

158. Ameri M, Mansourian A, Sheikhmotevali AH. Investigating effects of ethylene vinyl acetate and gilsonite modifiers upon performance of base bitumen using Superpave tests methodology. Constr Build Mater 2012;36:1001–7.

159. Ameri M, Mansourian A, Sheikhmotevali AH. Laboratory evaluation of ethylene vinyl acetate modified bitumens and mixtures based upon performance related parameters. Constr Build Mater 2013;40:438–47.

160. Airey GD. Rheological evaluation of ethylene vinyl acetate polymer modified bitumens. Constr Build Mater 2002;16(8):473–87.

161. Airey GD. Rheological properties of styrene butadiene styrene polymer modified road bitumens. Fuel 2003;82(14):1709–19.

162. Bahia HU, Hanson DI, Zeng M, Zhai H, Khatri MA, Anderson RM. Characterization of modified asphalt binders in Superpave mix design. Washington, D.C.: Transportation Research Board; 2001. Report No.: NCHRP, Report 459.

163. González O, Peña JJ, Muñoz ME, Santamaría A, Pérez-Lepe A, Martínez-Boza F, et al. Rheological techniques as a tool to analyze polymer–bitumen interactions: bitumen modified with polyethylene and polyethylene-based blends. Energy Fuels 2002;16(5):1256–63.

164. Attaelmanan M, Cheng PF, AI AH. Laboratory evaluation of HMA with high density polyethylene as a modifier. Constr Build Mater 2011;25(5):2764–70.

165. Stastna J, Zanzotto L, Vacin OJ. Viscosity function in polymermodified asphalts. J Colloid Interface Sci 2003;259(1):200–7.

166. Champion L, Gerard JF, Planche JP, Martin D, Anderson D. Low temperature fracture properties of polymer-modified asphalts relationships with the morphology. J Mater Sci 2001;36(2):451–60.

167. Isacsson U, Lu X. Characterization of bitumens modified with SEBS, EVA and EBA polymers. J Mater Sci 1999;34(15):3737–45.

168. Lucena MCC, Soares SA, Soares JB. Characterization and thermal behavior of polymer-modified asphalt. Mater Res Ibero-American J Mater 2004;7(4):529–34.

169. Zhang Y, Zhao S, Li Y, Xie L, Sheng K. Radiation effects on styrenebutadiene–styrene copolymer. Nucl Instrum Methods Phys Res, Sect B 2008;266(15):3431–6.

170. Masson JF, Collins P, Robertson G, Woods JR, Margeson J. Thermodynamics, phase diagrams, and stability of bitumen–polymer blends. Energy Fuels 2003;17(3):714–24.

171. Galooyak SS, Dabir B, Nazarbeygi AE, Moeini A. Rheological properties and storage stability of bitumen/SBS/montmorillonite composites. Constr Build Mater 2010;24(3):300–7.

172. Wloczysiak P, Vidal A, Papirer E, Gauvin P. Relationships between rheological properties, morphological characteristics, and composition of bitumen–styrene butadiene styrene copolymers mixes. I. A three-phase system. J Appl Polym Sci 1998;65(8):1595–607.

173. Collins JH, Bouldin MG. Stability of straight and polymer-modified asphalts. Trans Res Rec: J Trans Res Board 1992;1342:92–100.

174. Gelles R, Collins JH, Bouldin MG, inventor. Shell Oil Company, assignee. Asphalt-block copolymer paving composition. United States patent US 5118733. 1992 June 2.

175. Vargas MA, Chávez AE, Herrera R, Manero O. Asphalt modified by partially hydrogenated SBS tri-block copolymers. Rubber Chem Technol 2005;78(4):620–43.

176. Scholten EJ, Vonk W, Korenstra J. Towards green pavements with novel class of SBS polymers for enhanced effectiveness in bitumen and pavement performance. Int J Pavement Res Technol 2010;3(4):216–22.

177. Scholten EJ, Vonk WC. inventor. Kraton Polymers US LLC, assignee. Block copolymer and polymer modified bituminous binder composition for use in base course asphalt paving application. United States patent US 8357735. 2013 January 22.

178. Peralta J, Raouf MA, Tang S, Williams RC. Bio-renewable asphalt modifiers and asphalt substitutes. In: Gopalakrishnan K, van Leeuwen JH, Brown RC, editors. Sustainable bioenergy and bioproducts value added engineering applications. London: Springer; 2012. p. 89–115.

179. Bloomfield GF. Modern views on the chemistry of vulcanization changes. III. Reaction of sulfur with squalene and with rubber. J Polym Sci 1946;1(4):312–7.

180. Chough SH, Chang DH. Kinetics of sulfur vulcanization of NR, BR, SBR, and their blends using a rheometer and DSC. J Appl Polym Sci 1998;61(3):449–54.

181. Versloot P, Haasnoot JG, Nieuwenhuizen PJ, Reedijk J, van Duin M, Put J. Sulfur vulcanization of simple model olefins, Part V: double bond isomerization during accelerated sulfur vulcanization as studied by model olefins. Rubber Chem Technol 1997;70(1):106–19.

182. Petrossi U, Bocca PL, Pacor P. Reactions and technological properties of sulfur-treated asphalt. Ind Eng Chem Prod Res Dev1972;11(2):214–9.

183. Syroezhko AM, Begak OYu, Fedorov VV, Gusarova EN. Modification of paving asphalts with sulfur. Russ J Appl Chem 2003;76(3):491–6.

184. Cheng G, Shen B, Li H, Hao J, Ling H. Determination of the main sulfur-containing compounds in sulfide asphalt and the mechanism of asphalt sulfidation. J East China Univ Sci Technol – Nat Sci Ed 2008;34(3):319–23 [In Chinese].

185. Sun D, Ye F, Shi F, Lu W. Storage stability of SBS-modified road asphalt: preparation, morphology, and rheological properties. Pet Sci Technol 2006;24(9):1067–77.

186. Lee D. Modification of asphalt and asphalt paving mixtures by sulfur additives. Ind Eng Chem Prod Res Dev 1975;14(3):171–7.

187. De Filippis P, Giavarini C, Santarelli ML. Reaction of visbreaker bitumens with sulfur. Pet Sci Technol 1997;15(7–8):743–53.

188. De Filippis P, Giavarini C, Santarelli ML. Sulphur-extended asphalt: reaction kinetics of H2S evolution. Fuel 1998;77(5):459–63.

189. Sinha Ray S, Okamoto M. Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 2003;28(11):1539–641.

190. Ray SS, Bousmina M. Biodegradable polymers and their layered silicate nanocomposites: in greening the 21st century materials world. Prog Mater Sci 2005;50(8):962–1079.

191. Vargas MA, Vargas MA, Sánchez-Sólis A, Manero O. Asphalt/ polyethylene blends: rheological properties, microstructure and viscosity modeling. Constr Build Mater 2013;45:243–50.

192. Rojas JM, Hernández NA, Manero O, Revilla J. Rheology and microstructure of functionalized polymer-modified asphalt. J Appl Polym Sci 2010;115(1):15–25.

193. Gelles R, inventor. Shell Oil Company, assignee. Asphalt-diene polymer composition with improved adhesion to polar materials. United States patent US 5130354. 1992 July 14.

194. Crossley GA, Hesp SAM. New class of reactive polymer modifiers for asphalt: mitigation of moisture damage. Trans Res Rec: J Trans Res Board 2000;1728:52–9.

195. Maurano CHF, Portal LL, Neto RB, Mauler RS. Functionalization of styrene–butadiene–styrene (SBS) triblock copolymer with maleic anhydride. Polym Bull 2001;46(6):491–8.

196. Cordella CD, Cardozo NSM, Neto RB, Mauler RS. Functionalization of styrene–butadiene–styrene (SBS) triblock copolymer with glycidyl methacrylate (GMA). J Appl Polym Sci 2003;87(13):2074–9.

197. Selvavathi V, Sekar VA, Sriram V, Sairam B. Modifications of bitumen by elastomer and reactive polymer – a comparative study. Pet Sci Technol 2002;20(5–6):535–47.

198. Bahia HU, Davies R. Effect of crumb rubber modifiers (CRM) on performance related properties of asphalt binders (with discussion). In: Asphalt paving technology 1994: Journal of the Association of Asphalt Paving Technologists; 1994 March 21–23; St. Louis, Missouri. St. Paul, Minnesota: Association of Asphalt Paving Technologists; 1994. p. 414–438.

199. Hınıslıog˘lu S, Ag˘ar E. Use of waste high density polyethylene as bitumen modifier in asphalt concrete mix. Mater Lett 2004;58(3–4):267–71.

200. García-Morales M, Partal P, Navarro FJ, Gallegos C. Effect of waste polymer addition on the rheology of modified bitumen. Fuel 2006;85(7–8):936–43.

201. Panda M, Mazumdar M. Utilization of reclaimed polyethylene in bituminous paving mixes. J Mater Civ Eng 2002;14(6):527–30.

202. Yousefi AA, Ait-Kadi A, Roy C. Composite asphalt binders: effect of modified RPE on asphalt. J Mater Civ Eng 2000;12(2):113–23.

203. García-Morales M, Partal P, Navarro FJ, Martínez-Boza FJ, Gallegos C. Processing, rheology, and storage stability of recycled EVA/LDPE modified bitumen. Polym Eng Sci 2007;47(2):181–91.

204. Abdel-Goad MAH. Waste polyvinyl chloride-modified bitumen. J Appl Polym Sci 2006;101(3):1501–5.

205. García-Morales M, Partal P, Navarro FJ, Martínez-Boza F, Mackley MR, Gallegos C. The rheology of recycled EVA/LDPE modified bitumen. Rheol Acta 2004;43(5):482–90.

206. García-Morales M, Partal P, Navarro FJ, Martínez-Boza F, Gallegos C. Linear viscoelasticity of recycled EVA-modified bitumens. Energy Fuels 2004;18(2):357–64.

207. Fuentes-Audén C, Sandoval JA, Jerez A, Navarro FJ, Martínez-Boza FJ, Partal P, et al. Evaluation of thermal and mechanical properties of recycled polyethylene modified bitumen. Polym Test 2008;27(8):1005–12.

208. Fang C, Li T, Zhang Z, Jing D. Modification of asphalt by packaging waste-polyethylene. Polym Compos 2008;29(5):500–5.

209. Casey D, McNally C, Gibney A, Gilchrist MD. Development of a recycled polymer modified binder for use in stone mastic asphalt. Resour Conserv Recycl 2008;52(10):1167–74.

210. Singh B, Gupta M, Tarannum Hina. Mastic of polymer-modified bitumen and poly(vinyl chloride) wastes. J Appl Polym Sci 2003;90(5):1347–56.

211. Fang C, Zhang Y, Yu Q, Zhou X, Guo D, Yu R, et al. Preparation, characterization and hot storage stability of asphalt modified by waste polyethylene packaging. J Mater Sci Technol 2013;29(5):434–8.

212. Murphy M, O’Mahony M, Lycett C, Jamieson I. Bitumens modified with recycled polymers. Mater Struct 2000;33(7):438–44.

213. Naskar M, Chaki TK, Reddy KS. Effect of waste plastic as modifier on thermal stability and degradation kinetics of bitumen/waste plastics blend. Thermochim Acta 2010;509(1–2):128–34.

214. Ai AH, Tan YQ, Hameed AT. Starch as a modifier for asphalt paving materials. Constr Build Mater 2011;25(1):14–20.

215. Naskar M, Chaki TK, Reddy KS. A novel approach to recycle the waste plastics by bitumen modification for paving application. Adv Mater Res 2012;356–360:1763–8.

216. Fang C, Yu R, Zhang Y, Hu J, Zhang M, Mi X. Combined modification of asphalt with polyethylene packaging waste and organophilic montmorillonite. Polym Test 2012;31(2):276–81.

217. Fang C, Yu R, Li Y, Zhang M, Hu J, Zhang M. Preparation and characterization of an asphalt-modifying agent with waste packaging polyethylene and organic montmorillonite. Polym Test 2013;32(5):953–60.

218. Li Z, Li C. Improvement of properties of styrene–butadiene– styrene-modified bitumen by grafted eucommia ulmoides gum. Road Mater Pavement Des 2013;14(2):404–14.

219. Cuadri AA, García-Morales M, Navarro FJ, Partal P. Isocyanatefunctionalized castor oil as a novel bitumen modifier. Chem Eng Sci 2013;97:320–7.

220. Kim YR, Lutif JS, Bhasin A, Little DN. Evaluation of moisture damage mechanisms and effects of hydrated lime in asphalt mixtures through measurements of mixture component properties and performance testing. J Mater Civ Eng 2008;20(10):659–67.

221. Kim YR, Pinto I, Park SW. Experimental evaluation of anti-stripping additives in bituminous mixtures through multiple scale laboratory test results. Constr Build Mater 2012;29:386–93.

222. Isacsson U. Portland cement as an anti-stripping additive in bituminous road bases. In: Proceedings of the IPENZ Annual Conference 1996: Engineering, Providing the Foundations for Society, 1; 1996 February 9–13; Dunedin, New Zealand. Wellington: Institution of Professional Engineers New Zealand;1996. p. 98–102.

223. Iskender E, Aksoy A, Ozen H. Indirect performance comparison for styrene–butadiene–styrene polymer and fatty amine anti-strip modified asphalt mixtures. Constr Build Mater 2012;30:117–24.

224. Hossain Z, Zaman M, Hobson KR. Effects of liquid anti-stripping additives on rheological properties of performance grade binders. Int J Pavement Res Technol 2010;3(4):160–70.

225. Graf PE. Factors affecting moisture susceptibility of asphalt concrete mixes. In: Asphalt paving technology 1986: Journal of the Association of Asphalt Paving Technologists; 1986 February 17–18; Clearwater Beach, Florida. St. Paul, Minnesota: Association of Asphalt Paving Technologists; 1986. p. 175–191.

226. DiVito JA, Morris GR. Silane pretreatment of mineral aggregate to prevent stripping in flexible pavements. Trans Res Rec: J Trans Res Board 1982;843:104–11.

227. Fromm HJ, Kennepohl GJA. Sulphur asphaltic concrete on three Ontario test roads. In: Asphalt Paving Technology1979: Journal of the Association of Asphalt Paving Technologists; 1979 February 19–21; Denver, Colorado. St. Paul, Minnesota: Association of Asphalt Paving Technologists; 1979. p. 135–162.

228. Bagampadde U, Isacsson U, Kiggundu BM. Classical and contemporary aspects of stripping in bituminous mixes. Road Mater Pavement Des 2004;5(1):7–43.

229. Crossley GA, Hesp SAM. New class of reactive polymer modifiers for asphalt: mitigation of low-temperature damage. Trans Res Rec: J Trans Res Board 2000;1728:68–74.

230. Button JW. Summary of asphalt additive performance at selected sites. Trans Res Rec: J Trans Res Board 1992;1342:67–75.

231. McDaniel R, Shah A. Asphalt additives to control rutting and cracking. Washington, D.C.: Federal Highway Administration; 2003 January. Report No.: FHWA/IN/JTRP-2002/29.

232. Woo WJ, Ofori-Abebresse E, Chowdhury A, Hilbrich J, Kraus Z, Martin AE, Glover CJ. Polymer modified asphalt durability in pavements. Washington, D.C.: Federal Highway Administration; 2007 July. Report No.: FHWA/TX-07/0-4688-1.

233. Woo WJ. Development of a long-term durability specification for polymer modified asphalt [doctoral dissertation]. College Station (Texas): Texas A&M University; 2007.

234. Dumont AG, Ould-Henia M. Long term effect of modified binder on cracking resistance of pavements. In: Proceedings of the fifth international RILEM conference on reflective cracking in pavements; 2004 May 5–7. Limoges, France. Bagneux France: RILEM Publications SARL; 2004. p. 511–8.

235. Dreessen S, Planche JP, Ponsardin M, Pittet M, Dumont AG. Durability study: field aging of conventional and polymermodified binders. In: Transportation Research Board 89th Annual Meeting Compendium of Papers DVD; 2010 January 10–14; Washington, D.C. Washington, D.C.: Transportation Research Board; 2010; Paper No.: 10–2127.

236. Hesp SAM, Genin SN, Scafe D, Shurvell HF, Subramani S. Five year performance review of a northern Ontario pavement trial: Validation of Ontario’s double-edge-notched tension (DENT) and extended bending beam rheometer (BBR) test methods. In: Proceedings of the Fifty-fourth Annual Conference of the Canadian Technical Asphalt Association; 2009 November 15–18; Moncton, New Brunswick. Laval, Quebec: Polyscience Publications; 2009. p. 99–126.

237. Wright L, Kanabar A, Moult E, Rubab S, Hesp S. Oxidative aging of asphalt cements from an Ontario pavement trial. Int J Pavement Res Technol 2011;4(5):259–67.

238. Erskine JA, Hesp SAM, Kaveh F. Another look at accelerated aging of asphalt cements in the pressure aging vessel. In: Proceedings of the Fifth Eurasphalt and Eurobitume Congress; 2012 June 13–15; Istanbul, Turkey. Brussels, Belgium: Eurasphalt & Eurobitume Congress; 2012; Paper No.: P5EE-202.

239. de Sá Araujo MFA, Lins VFC, Pasa VMD, Leite LFM. Weathering aging of modified asphalt binders. Fuel Process Technol 2013;115:19–25.

240. Ma T, Yuan H. Aging behavior characterization of SBS-modified asphalt for recycling purpose. In: Sustainable Construction Materials 2012: Proceedings of the 2nd International Conference on Sustainable Construction Materials: Design, Performance and Application; 2012 October 18–22; Wuhan, China. Reston, Virginia: American Society of Civil Engineers; 2013. p. 261–275.

241. Romera R, Santamaría A, Peña JJ, Muñoz ME, Barral M, García E, et al. Rheological aspects of the rejuvenation of aged bitumen. Rheol. Acta 2006;45(4):474–8.

242. Geng J, Li H, Sheng Y, Zhang Q. Recycling characteristics of polymer modified asphalt. In: Proceedings of the 2011 International Conference on Electric Technology and Civil Engineering; 2011 April 22–24; Lushan, China. New York: Institute of Electrical and Electronics Engineers; 2011. p. 6095–6098.

243. Ma T, Huang X, Zhao Y, Bahia HU. Compound rejuvenation of polymer modified asphalt binder. J Wuhan Univ Technol – Mater Sci Ed 2010;25(6):1070–6.

244. Daranga C. Characterization of aged polymer modified asphalt cements for recycling purposes [doctoral dissertation]. Baton Rouge, Louisiana: Louisiana State University; 2005.

245. Ma T, Chen C, Li C. Laboratory investigation of recycling for aged SBS modified asphalt cement. In: Soliamanian M, Hong F, Won M, Choi S, Yuan J, editors. Pavements and materials: recent advances in design, testing, and construction. Geotechnical Special Publication No. 212. Reston, Virginia: American Society of Civil Engineers; 2011. p. 139–149.

246. Mohammad LN, Negulescu II, Wu Z, Daranga C, Daly WH, Abadie C. Investigation of the use of recycled polymer modified asphalt binder in asphalt concrete pavements (with discussion and closure). In: Asphalt paving technology 2003: Journal of the Association of Asphalt Paving Technologists; 2003 March 10–12; Lexington, Kentucky. St. Paul, Minnesota: Association of Asphalt Paving Technologists; 2003. p. 551–594.

247. ГОСТ 11505-75 Методика определения растяжения нефтяного битума.

248. ГОСТ Р 52056-2003 Вяжущие полимерно-битумные дорожные на основе блоксополимеров типа стирол-бутадиен-стирол.

249. ГОСТ 11506-73 Метод определения температуры размягчения по кольцу и шару.

250. ГОСТ 11501-78 Метод определения глубины проникания иглы.

251. ГОСТ 11508-74 Метод определения сцепления битума с мрамором и песком.

252. ГОСТ 22245-90 Битумы нефтяные дорожные вязкие.