Студопедия.Орг Главная | Случайная страница | Контакты | Мы поможем в написании вашей работы!  
 

Indoor fish farming



An alternative to outdoor open ocean cage aquaculture, one in which the risk of environmental damage is high, is through the use of a recirculation aquaculture system (RAS). A RAS is a series of culture tanks and filters where water is continuously recycled and monitored to keep optimal conditions year round. To prevent the deterioration of water quality, the water is treated mechanically through the removal of particulate matter and biologically through the conversion of harmful accumulated chemicals into nontoxic ones.

Other treatments such as UV sterilization, ozonation, and oxygen injection are also used to maintain optimal water quality. Through this system, many of the environmental drawbacks of aquaculture are minimized including escaped fish, water usage, and the introduction of pollutants. The practices also increased feed-use efficiency growth by providing optimum water quality (Timmons et al., 2002; Piedrahita, 2003).

One of the drawbacks to recirculation aquaculture systems is water exchange. However, the rate of water exchange can be reduced through aquaponics, such as the incorporation of hydroponically grown plants (Corpron and Armstrong, 1983) and denitrification (Klas et al., 2006). Both methods reduce the amount of nitrate in the water, and can potentially eliminate the need for water exchanges, closing the aquaculture system from the environment. The amount of interaction between the aquaculture system and the environment can be measured through the cumulative feed burden (CFB kg/M3), which measures the amount of feed that goes into the RAS relative to the amount of water and waste discharged.

Because of its high capital and operating costs, RAS has generally been restricted to practices such as broodstock maturation, larval rearing, fingerling production, research animal production, SPF (specific pathogen free) animal production, and caviar and ornamental fish production. Although the use of RAS for other species is considered by many aquaculturalists to be impractical, there has been some limited successful implementation of this with high value product such as barramundi, sturgeon and live tilapia in the US.

Make two-way translation of the text:

Fish – a Source of Inspiration for Efficient Energy Production Риби як зразок ефективного виробництва енергії
A perfect balance exists between the movements and behavior of a creature, its habitat, and anatomic structure. The sciences try to understand this triple mechanism in every species and put the knowledge they gain to use in developing technology. Research developments in fluid mechanics have revealed the existence of particular mechanisms in the movement of fish in water. Through the sensors they are equipped with, fish perceive surrounding vortices in the water and adjust their position in such a way that they gain extra energy for movement. In 2003 James Liao from Cornell University proved for the first time that schools of fish save energy by benefiting from eddies. Another researcher, John Dabiri, has developed a mathematical model for applying this behavior of fish to mechanical systems. Як відомо, існує гармонія між ана-томічною будовою живих істот, їх поведінкою та середовищем прожи-вання. Взаємодія цих трьох факторів в кожній окремо взятій живій істоті є об'єктом наукових досліджень. На-приклад, виявлення різних способів плавання риб використовується для вдосконалення роботи рушійних гвинтів кораблів. Силу штовхання, яку продукують гвинти, риби вироб-ляють за допомогою рухів тіла та плавників. Новітні дослідження в галузі механіки рідин встановили, що існують специфічні механізми пересування риб у воді. Сенсори, наявні у риб, визначають місцезна-ходження нерухомих предметів і вири навколо них. Відповідно риби приводять своє тіло в зручне поло-ження по відношенню до водоверті, що забезпечує їм додаткову енергію для руху. Дослідник з Корнельсь-кого Університету Джеймс Ліо, вперше в 2003 році встановив, що косяк риб використовує вири для економії енергії. Джон дабір продо-вжив дослідження і склав математичну модель для зас-тосування цієї властивості риб в механічних системах.
Conventional water and wind turbines cannot function properly in a whirling current; the working of turbines depends on the existence of a steady and regular flow. In order to be able to obtain energy from vortices, turbines would need to mimic the movements of fish, adjusting their position to the differing angles of flow. A mechanical device to be developed in this respect should perceive the angle of the current flow instantly and adjust itself accordingly. Згідно класичних даних механіки рідин, в спонтанному перебігу виру неможлива безперервна робота гід-ро- і повітряних турбін, оскільки обертання турбін залежить від рів-номірності та постійності течії. Для того щоб механічний прилад зміг отримати енергію з вирів, необхідно щоб він повторював специфічні ру-хи риб, тобто механічний прилад повинен, як і риби, вміти миттєво розпізнавати кут виру і приймати відповідну позицію.
Normally, wind turbines are set up in high and open places. However, in cities the eddies that are formed by winds moving around buildings and roofs prevent conventional turbines from working efficiently. In order to overcome this challenge, scientists are aiming to develop turbines that benefit from the dynamic principles apparent in the movement of fish, though without imitating the fish exactly. They hope that in this way it will be possible to produce energy from turbulent currents as well. The projects being devised aim to develop different types of turbines to work in air and water. The energy production of these turbines will naturally be relatively low in comparison to common wind turbines operating in strong winds. However, these new types will make it possible to produce energy from winds moving at less than 32 feet per hour, when conventional turbines do not function. So, the total annual energy they are expected to produce will be no less than the regular wind turbines. If scientists can successfully model the admirable engineering applied in the bodies of fish, they will be able to boost the efficiency of these devices dramatically. Зазвичай повітряні турбіни вста-новлюються у високих і відкритих місцевостях. При цьому повітряні потоки, що змінюють свій напрямок через будівлі та дахи, перешкод-жають ефективній роботі повітря-них турбін. Для вирішення цієї про-блеми планується створення нової моделі турбіни, яка замість імітації руху риб буде враховувати динаміку цього руху. Таким чином, механіч-ний прилад, виготовлений за анало-гією з рухом риб, дозволить вироб-ляти енергію також з турбулентних течій. В даний час розробляються водний і повітряний типи даного приладу. Під час сильних вітрів дані прилади, в порівнянні зі звичайними турбінами, будуть виробляти менше енергії. Однак при течіях, швидкіс-тю нижче 10 м/сек, коли звичайні турбіни не можуть виробляти енер-гію, ці прилади будуть генерувати енергію, що дорівнює річному виро-бництву звичайної повітряної турбі-ни. Якби була можливість створити точні моделі інженерних механізмів, за якими створені риби, то продук-тивність цих приладів зросла б у багато разів.

TOPIC 24: THEORY OF INTERPRETER’S NOTE-TAKING (Continued)





Дата публикования: 2014-12-28; Прочитано: 217 | Нарушение авторского права страницы | Мы поможем в написании вашей работы!



studopedia.org - Студопедия.Орг - 2014-2024 год. Студопедия не является автором материалов, которые размещены. Но предоставляет возможность бесплатного использования (0.007 с)...