Sound Init

Hold Shift and press the Channel Select button to reset all the parameters of this channel to default values.

Shift/Exit Button

The Shift button is used together with the buttons to access additional parameters. These additional parameters are identified with the text below the buttons.

The Shift button can also be used to Exit a Store operation, if you change your mind about storing a program.

Dial

The Dial is used to select programs and to change the setting of a selected parameter.

Trig button

Use the Trig button to trigger a selected channel from the unit itself. Hold Shift and the Trig button to be able to adjust the Trig button’s velocity level with the Dial.

Parameter buttons

The parameters are accessed with the row of eight buttons. Edit mode is activated as soon as you press one of these buttons.

If a button activates a parameter in the upper row, a quick double-tap on the same button or by pressing the Row Select button will move the edit focus to the lower row parameters.

Hold down a button and turn the Dial to edit a red parameter.

Noise Parameters

There are several types of noise to choose from. The noise Filter and Sweep parameters can used to sculpt the sound of the noise.

Color

Use the Color parameter to change the sound of the Noise. Val­ues below 0 will have more bass content, values above 0 will have less.

Range: -10 - 10

Filter/Type

The Noise Filter is a Low Pass filter, it allows you to control how much of the high frequency noise to be filtered out of the sound. The lower you set the value, the duller the noise will become.

The second parameter is the Filter Type. There are 7 different types, each with an increasing amount of resonance that gives the filter a different sound quality. The Type setting is changed by holding the button, while turning the dial.

Filter Range: 0 – 99. Range Type: 1 – 7

Глава 3 Справочник | 11