Главная Случайная страница Контакты | Мы поможем в написании вашей работы! | ||
|
Misalignment of the wheel will result in abnormal wear, and may result in an unsafe riding condition.
Drive Chain Wear Inspection
• Remove:
Chain Cover
• Rotate the rear wheel to inspect the drive chain for damaged rollers, loose pins and links.
• If there is any irregularity, replace the drive chain.
• Lubricate the drive chain if it appears dry.
• Stretch the chain taut by hanging a 98 N (10 kg, 20 lb) weight [A] on the chain.
• Measure the length of 20 links [B] on the straight part [C] of the chain from the pin center of the 1 st pin to the pin center of the 21st pin. Since the chain may wear unevenly, take measurements at several places.
• If any measurements exceed the service limit, replace the chain. Also, replace the front and rear sprockets when the drive chain is replaced.
Цепь двигателя Длина с 20 связями
Стандарт: 317.5 ~ 318.2 мм (12.50 ~ 12.53 в.)
Сервисный Предел: 323 мм (12.7 в.)
Периодический ремонт 2-27
Дата публикования: 2014-12-25; Прочитано: 188 | Нарушение авторского права страницы | Мы поможем в написании вашей работы!