Стандартный ответ гипертерминала после включения аппарата

Boot&Mon. CheckSum OK!

[ POWER ON Booting... ]

Press any key to execute Monitor Program within 1 sec...

Kernel Data Read Start From Serial Flash

New kernel was found...

CHKSUM

{

check sum start address: 41000000, count: 001B0000

check sum: 0000A5A5

} /* Checksum End

Checksum OK!!

Kernel Data Read End

Find Compressed Kernel

Kernel UnZip Done!!

jump to 0x40080000

ramsize= 406BFFFF, gsbsize = 40501204, FreeMemPtr = 40500548, FreeMemStart = 40

<<< Reelase Mode >>>

<<<LogMsg_PrintOff>>>

Model Code: SCX3200

Main Kernel F/W Version: V3.00.01.08

Main Kernel F/W Date: OCT-18-2010

Check PowerOn Mode PBA Port ---- (GPIO3In - 0x2daff, GPIOIn - 0xef)

DRAM:>

################### Normal Mode Start##########################

*********************************************************************************************

Перед включением аппарата нажимаем клавишу N (на клавиатуре компьютера! Не на аппарате, там ее нет!)и удерживая её включаем питание. Клавишу тут же отпускаем. Аппарат выдаст следующее сообщение:

[ POWER ON Booting... ]

Press any key to execute Monitor Program within 1 sec...

<CPU:375Mhz RAM:166Mhz SysClk:125Mhz DDR2>

----------------------------------------------------------------

START-UP MODE: Monitor Program

Boot into pROBE+ like stand-alone mode

[Type 'help' to see command info.]

Version: Ver.1.17 (BlueMT) 2010-05-27

----------------------------------------------------------------

Do you want to download from external port?[N]: n

pROBE+>

Вводим команду «FL».

pROBE+> fl

Получаем сообщение:

Upgrade Flash ROM Image

FlashCheckSum

{

check sum start address: 40060000, count: 0000FFFE

check sum: 0000A5A5

} /* Checksum End

==> Now program restarted on the RAM to program flash ROM(0x40060000)

jump to 0x40060000

Flash Data Download Address: 0x41000000

===============================

Start flash_writer

===============================

verify_Image: 0x41000000

i_header->pul_start_addr: 0x00000000

i_header->ul_count: 0x00000000

model: 0x00000000

flash type: 0x00000000

image type: 0x00000000

temp_buf:

SIG:

Can not find sig

----------- Display Dcache Status ------------

Control register = 0x000510F8

Icahe: ON

Dcahe: OFF

MMU: OFF

Download Image from PC

{

Ready to download from Parallel/Usb/Serial (0x41000000)

-------------------------

Samsung OTG, 2006

Link ID: [00000000]

-------------------------